In this quiz there are 10 questions. This quiz should be finished within 30 minutes. If you are reading the answer and trying to understand each one of them, it might take longer.
Also please take a look at after this quiz, MPLS Design – 2 (30 Questions) quiz as well. There are different design questions in that quiz and together these two quizzes help you to asses your MPLS knowledge as well as learn new MPLS design concepts.
Good Luck and Enjoy !
MPLS Design – 1 (10 Questions)
0 of 10 questions completed
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
0 of 10 questions answered correctly
Time has elapsed
You have reached 0 of 0 points, (0)
Earned Points: 0 of 0, (0)
0 Essay(s) Pending (Possible Points: 0)
Thanks for taking this course. There are much more quizzes, design videos and other resources in the Self Paced CCDE Course of Orhan Ergun.
|Table is loading|
|No data available|
Question 1 of 10
Enterprise Company is using MPLS Layer 3 VPN for their Wide Area Network connections.
Their IGP protocol is EIGRP
Service Provider’s of the company is using IS-IS as an internal infrastructure IGP in their backbone and LDP for the label distribution
Which protocols/technologies should be used on Point A , B and C ?CorrectIncorrect
Question 2 of 10
Which below options are true for the MPLS layer 2 VPNs?CorrectIncorrect
Question 3 of 10
What was the initial purpose of MPLS?CorrectIncorrect
Question 4 of 10
Which below option depicts Inter-AS MPLS VPNs Option B ?CorrectIncorrect
Question 5 of 10
Enterprise company has 6 datacenters. Between the datacenter they have non-IP clustering heartbeat traffic
They don’t want to implement any vendor specific solution between the datacenters.
Their Service Provider is able to provide MPLS services.
Which Datacenter Interconnect solution is most appropriate for this company ?CorrectIncorrect
Question 6 of 10
Which options below can be used as a PE-CE routing protocol in MPLS Layer 3 VPN?CorrectIncorrect
Question 7 of 10
What are the characteristics of the below topology ?CorrectIncorrect
Question 8 of 10
Which below options are the results of having MPLS in the network?CorrectIncorrect
Question 9 of 10
Enterprise company wants to upgrade their legacy Frame Relay WAN circuits to MPLS.Based on the below migration steps, can you choose the best option for the smooth migration ?
Choose a transit site for the communication between migrated and non-migrated site.
Establish a new circuit at the transit site
Establish a new circuit at the remote site
Establish a BGP over the MPLS circuit
Arrange the routing protocol metric to choose MPLS over Frame Relay
Remove the old Frame Relay circuit from the remote site
Enable Quality of Service and Monitoring for the new MPLS connection
Remove the old Frame Relay circuit from the transit site
Question 10 of 10
What are the requirement to run MPLS Traffic Engineering in the network with constraint based SPF ?CorrectIncorrect