Unlock the full potential of EIGRP with my CCIE Enterprise EIGRP Lab—where you gain hands-on expertise in designing, optimizing, and troubleshooting one of the most efficient routing protocols in enterprise networks! WORKBOOK INCLUDED!
WORKBOOK INCLUDED!
CCIE Enterprise - EIGRP Lab - Initial + Full Configs
Enhanced Interior Gateway Routing Protocol (EIGRP) is a powerful distance-vector protocol with advanced features that combine the best of link-state and distance-vector routing. It offers rapid convergence, unequal-cost load balancing, and scalability for enterprise networks. This lab explores EIGRP’s core functionalities, including route summarization, stub routing for network optimization, bandwidth control, and advanced troubleshooting techniques.
By mastering EIGRP’s features—such as DUAL (Diffusing Update Algorithm) for fast route recalculation and IPv4/IPv6 support—network engineers can ensure efficient and resilient routing, making EIGRP a top choice for large-scale enterprise deployments.
You might also be interested in these labs:
- CCIE Enterprise - OSPF Lab Topology - 2 - Initial + Full Configs
- BGP Optimal Route Reflection - Add Path Lab
- CCIE Enterprise - MPLS Lab 1 - Initial + Full Configs
- CCIE Enterprise - Layer 2 Technologies Lab - Initial + Full Configs
- CCIE Enterprise - IP Multicast Lab - Initial + Full Configs
- CCIE Enterprise - EIGRP Lab - Initial + Full Configs
- CCIE Enterprise - BGP Lab - Initial + Full Configs
- CCIE Enterprise - OSPF Lab Topology -1 - Initial + Full Configs
- CCIE Enterprise - Quality of Service Lab - Initial + Full Configs
- Cisco CCIE Enterprise - SD-WAN Viptela Lab -1
- Cisco CCIE Enterprise - SD-WAN Viptela Lab -2
- CCIE Enterprise - VPN Lab - Initial + Full Configs
The default username and password for images used in this
course is as follows, however you will hear new passwords during the course if
the instructor changes the credentials:
|
Image name |
Username |
Password |
|
IOL images |
No username |
No password |
|
CSR1000v |
Admin |
Admin |
|
C8000v |
Admin |
admin |
|
Viptela devices |
Admin |
admin |
|
Windows Server |
Administrator |
Test123 |
|
IOS-XR** |
Admin |
Enter new password |
|
Cisco ASA 802 |
no username |
no passwd, hit enter |
|
Cisco ASA 8.4.2, 9.1.5 |
no username |
no passwd, hit enter |
|
Cisco ASAv |
no username |
no passwd, hit enter |
|
Cisco IPS |
cisco |
ciscoips123 |
|
Cisco WSA |
admin |
ironport |
|
Cisco ESA |
admin |
ironport |
|
Cisco WAAS |
admin |
default |
|
Cisco XRv9K *** |
Set username at bootup |
Set password at bootup |
|
Cisco NX9K |
admin |
No password |
** For Cisco XRv you are asked for a username and password
in the loading process. You can add any username and password other than admin,
root, sysadmin and other reserved usernames. Go with something like Alex/cisco
e.g.
Then when completely loaded, you can use cisco/cisco or
admin/admin.
***For XRv9K Full image you are asked for a username and password in the loading process. You then login using the username and password that you set.
Lab Requirements:
Time Required
Approximately 60 minutes
Credits
35 credits
Browser
Chrome, Firefox, or Edge (latest versions)
Connection
Stable internet connection required