CCIE SP - Unified MPLS - Initial + Full Configs

Unified MPLS is a scalable architecture designed for service provider networks to streamline MPLS deployments across multiple domains while maintaining end-to-end simplicity. It enables seamless interconnection between access, aggregation, and core networks using a hierarchical approach with seamless MPLS.

Key technologies include LDP and BGP for label distribution, route reflectors for scalable control plane management, and inter-area LSP stitching to maintain optimal forwarding paths.

By leveraging Unified MPLS, service providers can enhance network efficiency, reduce operational complexity, and support next-generation services such as mobile backhaul, VPNs, and carrier Ethernet with minimal latency and high reliability.

You might also be interested in these labs:

• CCIE SP - IS-IS - Initial + Full Configs
• CCIE SP - BGP Lab - Initial + Full Configs
• CCIE SP - Inter-AS MPLS VPN - All Inter-AS Options - Initial + Full Configs
• CCIE SP - Inter-AS MPLS VPN - Carrier Supporting Carrier Lab - Initial + Full Configs
• CCIE SP - Inter-AS MPLS VPN Option D Lab - Initial + Full Configs
• CCIE SP - Inter-AS MPLS VPN Option C Lab - Initial + Full Configs
• CCIE SP - Inter-AS MPLS VPN Option B Lab - Initial + Full Configs
• CCIE SP MPLS Lab 2 - Initial + Full Configs
• CCIE SP - Inter-AS MPLS VPN Option A Lab - Initial + Full Configs
• CCIE SP - H-VPLS - Initial + Full Configs
• CCIE SP - VXLAN - MPLS - EVPN - Initial + Full Configs

The default username and password for images used in this course is as follows, however you will hear new passwords during the course if the instructor changes the credentials: 

** For Cisco XRv you are asked for a username and password in the loading process. You can add any username and password other than admin, root, sysadmin and other reserved usernames. Go with something like Alex/cisco e.g.

Then when completely loaded, you can use cisco/cisco or admin/admin.

***For XRv9K Full image you are asked for a username and password in the loading process. You then login using the username and password that you set.