CCIE SP - RSVP Traffic Engineering - Initial + Full Configs

RSVP Traffic Engineering (RSVP-TE) is a critical MPLS mechanism used by service providers to control and optimize traffic flows across their backbone networks. Unlike traditional IGP-based routing, which forwards traffic purely based on shortest-path calculations, RSVP-TE allows for explicit path selection, enabling better bandwidth utilization, congestion avoidance, and fast reroute (FRR) capabilities.

It works by setting up label-switched paths (LSPs) with reserved resources, ensuring predictable performance for high-priority traffic like voice, video, and financial transactions. With support for constraint-based routing, link coloring, and backup tunnels,

RSVP-TE provides an essential toolset for delivering highly available, QoS-driven service provider networks.

You might also be interested in these labs:

• CCIE SP - IS-IS - Initial + Full Configs
• CCIE SP - BGP Lab - Initial + Full Configs
• CCIE SP - Inter-AS MPLS VPN - All Inter-AS Options - Initial + Full Configs
• CCIE SP - Inter-AS MPLS VPN - Carrier Supporting Carrier Lab - Initial + Full Configs
• CCIE SP - Inter-AS MPLS VPN Option D Lab - Initial + Full Configs
• CCIE SP - Inter-AS MPLS VPN Option C Lab - Initial + Full Configs
• CCIE SP - Inter-AS MPLS VPN Option B Lab - Initial + Full Configs
• CCIE SP MPLS Lab 2 - Initial + Full Configs
• CCIE SP - Inter-AS MPLS VPN Option A Lab - Initial + Full Configs
• CCIE SP - H-VPLS - Initial + Full Configs
• CCIE SP - VXLAN - MPLS - EVPN - Initial + Full Configs

The default username and password for images used in this course is as follows, however you will hear new passwords during the course if the instructor changes the credentials: 

** For Cisco XRv you are asked for a username and password in the loading process. You can add any username and password other than admin, root, sysadmin and other reserved usernames. Go with something like Alex/cisco e.g.

Then when completely loaded, you can use cisco/cisco or admin/admin.

***For XRv9K Full image you are asked for a username and password in the loading process. You then login using the username and password that you set.