Stay updated with the latest insights, tutorials, and news
If you're responsible for networking infrastructure, you've probably had to deal with BGP (Border Gateway Protocol). It's one of the core protocols used on the internet and can be quite...
If you're interested in networking, then you've probably heard of the term "BGP community." But what are they? And what do they do? In this blog post, we'll take a...
There are several different IPv6 address types, each with its own unique properties. In this blog post, we'll explain the different types of IPv6 addresses and give examples of how...
In networking, the BGP MED attribute is an important part of the routing process. But what is it, and why is it important? This post will explain the purpose of...
Internet networking can be a confusing topic, but it doesn't have to be. In this blog post, we'll break down the differences between PPPoE vs. DHCP so you can understand...
Network Address Translation (NAT) and Port Address Translation (PAT) are two common techniques for translating IP addresses. Both methods have benefits and drawbacks, which can make them better or worse...
BGP is a complex protocol, and as a result, many things can go wrong when troubleshooting BGP issues. In this blog post regarding BGP troubleshooting, we'll take a look at...
BGP route advertisement is a critical process that helps routers exchange information about the best routes to various destinations. By understanding how BGP route advertisement works, you can better understand...
Are you curious about NAT overloading? Do you want to learn more about what it is and how it works? If so, you're in luck. In this blog post, we'll...
A Layer 2 switch and a Layer 3 switch are both networking devices that allow for communication between devices on a network. However, they each serve a different purpose and...
Are you familiar with the OSPF DR election process? If not, or if you're just looking for a refresher, read on! This article will explain what DR elections are, why...
OSPF (Open Shortest Path First) is a link-state routing protocol that uses a cost metric to calculate the best route between two nodes. In this article, we'll look at how...